As a Harley Bagger rider, I’ve spent a lot of time searching for the perfect 2-into-1 exhaust. I realized that the stock exhausts that come with most Harleys just don’t cut it in various areas. So, I decided to dive into the world of aftermarket exhausts, seeking big benefits and the awesome aesthetics that come with upgrading.
Fuel efficiency, engine performance, and shedding dead weight were my top priorities. I soon discovered that to really maximize these benefits, a 2-into-1 exhaust was the way to go.
I didn’t just want to recommend something off the top of my head, so I put various options to the test, comparing them based on price, materials, brand trustworthiness, build quality, and the variety of features.
One thing that stood out about the Harley Bagger was the excess weight it usually carries. I knew I had to focus on weight reduction with my choices for the best 2-into-1 exhausts. I needed something that would offset the load and truly enhance the ride.
After considerable hands-on experimentation and comparison, I found the Two Brothers Comp-S-2 to be the standout. Though it wasn’t the most affordable option on my list, it shone in all other aspects, especially in weight reduction.
I can confidently say, based on my own personal experience, that the Comp-S-2 is my number one choice for the Harley Bagger. Its near lack of drawbacks and the awesome weight reduction it offered sealed the deal for me. If you’re in a similar situation and want to upgrade your Bagger’s exhaust, I highly recommend giving it a try!
Two Brothers Comp-S 2-Into-1 Exhaust
The Two Brothers Comp S2 series caught my eye as I was searching for a lightweight 2-into-1 exhaust, especially for my Harley Bagger. I must admit, it’s not the cheapest option out there, but after exploring its benefits and putting it to the test, I realized why it’s considered the best 2-into-1 exhaust for a Harley Bagger.
I’ve had a unique experience with Two Brothers, actually getting the chance to tour their production facility in the US. The level of quality I witnessed in their exhausts was outstanding, and knowing that they’re made right here at home was an added bonus.
What really stood out to me about the Comp S2 was the weight reduction. Two-into-one exhausts inherently reduce weight by using less piping, but the high-quality stainless steel used in the Comp-S series takes that reduction even further. Of course, the exact weight saved will depend on your stock exhaust’s material, but it’s a noticeable difference.
But weight reduction wasn’t the only reason I recommended the Comp-S. My Harley, when heavily loaded, tended to be slow off the mark, a common issue with Harley Baggers. But with the Comp-S, the improvements in horsepower and torque were impressive. It eliminated that sluggish start and made speeding off at the lights an exhilarating experience.
The build quality? Well, Two Brothers leaves nothing to chance. I’ve touched and felt the exhaust, and I can personally vouch for its top-tier build. The welds are all hand-made, giving a sense of craftsmanship that justifies the price tag. It’s not an inexpensive exhaust, but you’re investing in weight reduction, durability, longevity, and enhanced performance, not to mention better fuel efficiency.
After installing it on my Harley, I understood why it stands out. The way the pipes efficiently moved gases from the engine out into the air transformed the ride. I’m more than satisfied with the Comp-S and believe anyone looking to improve their Harley Bagger’s performance will find it worth every penny.
- Trusted brand
- Greatly improved horsepower
- Improved torque gains
- Produced in the USA
- Welded by hand
- Improved ground clearance
- Carbon fibre end cap
- Top-quality stainless steel tubing
- Useful instruction manual
- Awesome sounding
- Installation parts included
- Great customer reviews
- Fits a lot of Harley types
- Installation can be tricky
Bassani Crossover Eliminator 2-Into-1 Exhaust
Investing in a Harley Davidson, especially a Harley Bagger, is no small feat, and I can tell you firsthand that it can pretty much drain your bank account. I found myself in this exact situation when I was gearing up for a tour and realized I needed a new 2-into-1 exhaust for my Harley Bagger, but my budget was tight.
After scouring the market, I stumbled upon a budget option that didn’t compromise on reputation and trust: Bassani’s Crossover Eliminator. I’ve always associated Bassani with premium exhausts, so I was pleasantly surprised to find something at this price point.
I decided to give the Crossover Eliminator a try, and here’s what I discovered: it really shines at higher speeds. If you’re looking to squeeze some higher revs out of your Bagger, this might be just what you need. Now, personally, I’m more of a torque guy, especially when weighed down on a tour, but the Eliminator’s long and wide diameter piping meant that it excelled at high speeds, getting my revs higher than ever.
Appearance-wise, I must say I was drawn to the black finish (though it did cost a little extra), and it gave the exhaust a very appealing look.
Of course, being a budget option, the Crossover Eliminator didn’t have the top-quality design I’ve seen in pricier models. That meant it wasn’t as loud and didn’t have that deep purr you might expect from more expensive alternatives. Its length, which is quite extensive, is the chief reason for it being quieter, but I still found it to be a significant improvement over a stock exhaust.
Now, let’s talk about what might be a drawback or a selling point, depending on your personal preference. The Eliminator will push your top speeds, but it does come at the cost of some of your motorcycle’s torque. As a Harley Bagger rider, I tend to value torque, but I can’t deny the thrill of those higher revs. Ultimately, it’s a choice that’s up to you.
For me, the Bassani Crossover Eliminator was a budget-friendly option that delivered what I needed for my tour, without breaking the bank. It might not be for everyone, but it could be the right fit for you if you find yourself in a similar pinch.
- Great sound
- Good aesthetic
- Excellent bang for your buck
- Top-quality brand
- Long piping reduces weight reduction
- Some riders complain of poor fitment
Vance & Hines Pro Pipe 2 Into 1 Exhaust
When I was searching for an exhaust that wouldn’t break the bank yet still deliver on aesthetics and performance, I came across Vance and Hines’ Pro Pipe 2-into-1. Let me tell you, they’ve done an excellent job.
I wanted something similar to the Two Brothers’ option but was looking for a real boost in torque for my Harley Bagger. The Pro Pipe 2-into-1 caught my eye, and I soon noticed that it’s quite a short exhaust. This was perfect for me, as I knew it would not only improve my bike’s torque but unleash a deep, loud roar. Riding down the road, I felt like announcing to everyone, “Hey, there’s a Harley Bagger on the road!”
What really impressed me about the Pro Pipe was not just its torque enhancement but the across-the-board improvements, all while dropping a lot of weight compared to a stock exhaust. Composed mostly of high-quality chrome, it is heavier than something like stainless steel, but the higher quality meant I still enjoyed weight reductions. The relatively short length of the Pro Pipe made up for the weight increase of the chrome, balancing durability and longevity.
Compared to my stock exhaust, the 2-into-1 Pro Pipe sits a lot higher off the ground. I know some riders have a problem with scraping the bottom of their exhaust when turning hard. Luckily, the Pro Pipe’s design reduces this chance, which was a nice bonus for me.
Now, let’s talk about the sound. The Pro Pipe has a pretty thick roar to it, standard for a company like Vance and Hines. But I’ve got to admit, as a bagger rider planning a long tour, a loud exhaust can wear on my nerves after a few hours. Thankfully, I discovered you can purchase a separate baffle for the Pro Pipe to make it quieter if needed.
However, if you’re like me and sometimes crave that thundering exhaust that shakes the earth where you ride, there’s also a separate baffle available to enhance this already loud 2-into-1 exhaust. The flexibility of the Pro Pipe to match my mood and needs made it a valuable addition to my Harley Bagger. In the end, I was more than satisfied with the performance, aesthetics, and affordability it offered.
- Greatly improved torque
- Improved weight
- Made in USA
- Thick deep roar
- Improved height from the ground
- Decent bang for buck
- Fits majority of Harleys
- Very positive customer reviews
- Chrome reduces weight benefits
- Novice riders may struggle with install